Sintered stone is ultra-compact engineered stone — a blend of natural minerals fired at roughly 1200°C and pressed into a continuous non-porous slab. The result: heat resistance that lets you set a hot hair tool down without trivet damage, scratch resistance that survives rings and keys, and a surface that does not absorb cosmetics, oils, or hard-water minerals. Unlike polished natural marble, it will not etch when perfume or lemon contacts the top, and does not require annual sealing.

Five curated finishes are offered — Black Marquina with gold veining, Calacatta Gold, Calacatta Black, Ice Grey, and White Carrara — so the stone can carry the room without a mirror or tile picking up the conversation.

Both basins are ceramic, moulded as one piece with the sintered-stone surround so there is no caulked seam between the counter and the bowl. Water drains directly down the basin wall into the centre drain without puddling along a silicone joint — the most common long-term failure point on a conventional drop-in sink.

Internal dimensions give roughly 12-1/2" × 13-3/4" per bowl of wash space with a 5-7/8" basin depth. Pre-drilled for a single-hole faucet; a matching ceramic backsplash ships with every unit.

The cabinet is engineered wood finished in light grey with a hand-cut fluted front — vertical grooves milled into the facing so light rakes across the face of the cabinet and adds texture without colour. Carcass construction uses moisture-tolerant panels rated for bathroom humidity; edges are PVC-sealed to prevent long-term swelling at corners.

Drawers run on Blum TandemBox — the Austrian-made slide system specified on premium European kitchen cabinetry. Full-extension, soft-close with a BLUMOTION damper, rated for 70 lb dynamic load per drawer. Push the drawer and it self-completes the last inch; it will not slam if the kids close it too hard.

Unlike friction-fit slides, TandemBox hardware is factory-aligned and locks to the drawer body — adjustments stay put rather than drifting out of square after a year.

The vanity is engineered to float clear of the floor on a concealed steel wall bracket. No legs, no toe-kick, no base trim — the floor tile runs straight under the cabinet so a wet-mop reaches every inch. The bracket is height-adjustable during install, which lets you align the top of the cabinet to an existing mirror or wall tile course without shimming.

The mount is rated well above the loaded weight of the top + basin + daily use. Installation should hit a stud or use a spanning blocking plate if the wall is unframed in the right locations; see the installation & dimension guide below.

• 60" model: top 60" W × 21-1/2" D × 4-3/4" thick · cabinet 60" W × 18" H × 22-1/16" D
• 71" model: top 71" W × 21-1/2" D × 4-3/4" thick · cabinet 71" W × 18" H × 22-1/16" D
• Mount: wall-mount, concealed steel bracket hardware
• Basin: two integrated ceramic basins, pre-drilled for single-hole faucet
• Drawer hardware: Blum TandemBox, full-extension soft-close

• Pre-assembled 60–71" engineered wood cabinet in light grey
• Sintered-stone top with twin integrated ceramic basins
• Matching ceramic backsplash pieces
• Concealed wall-mount steel bracket hardware
• Pre-drilled faucet mounts — single-hole configuration

• Daily: wipe the top and basin with a damp microfiber cloth
• Weekly: mild pH-neutral soap if a residue builds up
• Avoid: abrasive pads, bleach, ammonia, oven cleaner, or rust removers on the stone
• Cabinet: dry with a soft cloth after splashes; do not let standing water sit on the light grey finish overnight

Sintered stone does not require sealing. Ceramic basins accept any household bathroom cleaner — avoid scouring powder.